Evaluating a real part? Send CAD and requirements for a manufacturability review .
42 engineering guides
17 guides
Choose the alloy and AM route, control geometry and post-processing risk, define acceptance evidence, and issue a comparable RFQ.
Map titanium AM standards to the purchase order, review F3001 and F2924 supplier responses, and separate material certificates from finished-part acceptance.
Choose TC4, Ti-6Al-4V Grade 5, Ti-6Al-4V ELI Grade 23, or CP titanium for an AM part by service duty, specification route, feedstock controls, delivered condition, and acceptance evidence.
Choose LPBF, EBM, powder DED, or wire DED for titanium parts by geometry, scale, machining route, inspection burden, supplier evidence, and delivered-part economics.
Design titanium LPBF and EBM parts around support access, down-skin surfaces, thin-wall distortion, powder removal, machining datums, fatigue surfaces, and measurable acceptance.
Plan titanium AM post-processing as a controlled route through stress relief or heat treatment, HIP when justified, support removal, machining, surface finishing, cleaning, inspection, and release.
Engineering guide for titanium 3D printing fatigue design, covering surface finish, HIP, support scars, notches, build orientation, CT, coupons, and RFQ acceptance evidence.
A procurement guide to titanium AM powder reuse evidence, oxygen control, sampling, lot genealogy, and traceability for risk-based part acceptance.
A buyer guide to titanium AM in-situ monitoring, melt-pool and layer data, anomaly evidence, model governance, qualification, and part acceptance.
How to turn CT, CMM, NDT, coupons, surface data, build records, and traceability into a risk-based acceptance plan for titanium additive manufacturing parts.
How to specify titanium 3D printing tolerances with datum planning, machining stock, GD&T intent, CMM inspection, and RFQ wording for accepted parts.
Engineering guide for titanium 3D printed internal channels, powder removal, trapped-powder risk, CT inspection, cleaning access, surface finish, and RFQ acceptance criteria.
A buyer-focused guide to titanium 3D printing cost: how geometry, build height, supports, quantity, HIP, machining, CT/CMM, and documentation shape a Ti-6Al-4V quote.
A buyer-focused guide to Ti-6Al-4V 3D printing lead time, from CAD review and LPBF scheduling through heat treatment, machining, inspection, documentation, and repeat production.
Build a quote-ready titanium AM data package with STEP or native CAD, controlled drawings, material and process requirements, acceptance evidence, quantities, and delivery scope.
Use this no-go screen to compare titanium 3D printing, CNC machining, and hybrid manufacturing by geometry, tolerance, inspection access, qualification, and delivered cost.
A decision guide to titanium 3D printing applications, organized by the engineering problems Ti-6Al-4V additive manufacturing can solve rather than by industry labels.
What Apple, Airbus, NIST, and ISO evidence says—and does not say—about titanium AM production, wire DED, in-situ metrology, defect classification, and buyer readiness.
5 guides
Connect mass reduction and consolidated geometry to load paths, fatigue, interfaces, inspection, and design-authority approval.
How aerospace and defense buyers can use titanium 3D printing for supply-chain resilience without confusing speed, qualification, traceability, and production acceptance.
Engineering RFQ guide for titanium 3D printed spacecraft and satellite components, covering Ti-6Al-4V, LPBF, deployment mechanisms, propulsion manifolds, vibration, TVAC, CT, CMM, and traceability.
Engineering RFQ guide for titanium 3D printed eVTOL and advanced air mobility hardware, covering lightweight brackets, propulsion mounts, battery structures, cooling parts, fatigue, CMM, CT, and traceability.
Engineering RFQ guide for titanium 3D printed drone and UAV parts, covering lightweight brackets, payload mounts, vibration, fatigue, inspection evidence, and cost control.
Engineering RFQ guide for titanium 3D printed motorsport and racing parts, covering lightweight brackets, suspension links, cooling manifolds, exhaust-adjacent hardware, fatigue, CMM, CT, and rulebook risk.
1 guides
Separate printable patient-specific or porous geometry from material validation, cleaning, regulatory, packaging, and release responsibility.
Engineering RFQ guide for titanium 3D printed medical device and orthopedic implant parts, covering Ti-6Al-4V ELI, porous structures, CT, CMM, cleaning, traceability, and procurement evidence.
5 guides
Translate equipment goals into stiffness, moving mass, thermal duty, cleanliness, vacuum, serviceability, and precision interfaces.
Engineering RFQ guide for titanium 3D printed robotics parts, including EOAT, grippers, lightweight wrist adapters, automation fixtures, fatigue, CMM, and cost control.
Engineering RFQ guide for titanium 3D printed humanoid robot and AI robotics hardware, covering lightweight joints, wrist and ankle brackets, actuator housings, sensor mounts, fatigue, CMM, CT, and traceability.
Screen titanium AM semiconductor hardware by exposure: external supports, wafer-adjacent parts, vacuum interfaces, and process-gas paths need different cleaning, outgassing, leak, and acceptance evidence.
Engineering RFQ guide for titanium 3D printed quantum computing and cryogenic hardware, covering dilution refrigerator brackets, vacuum supports, thermal intercepts, RF cable routing, CMM, CT, cleaning, and traceability.
Engineering RFQ guide for titanium 3D printed AI data center liquid cooling hardware, covering cold plates, manifolds, coolant compatibility, leak testing, CT, CMM, surface finish, and cost control.
8 guides
Define fluid, temperature, pressure, code boundary, leak risk, internal geometry, and inspection ownership before choosing AM.
Screen titanium AM hydrogen hardware by exposure: PEM interfaces, water circuits, gas pressure boundaries, and structural fixtures need different material, cleaning, coating, and acceptance evidence.
Engineering RFQ guide for titanium 3D printed fusion energy and nuclear research hardware, covering vacuum fixtures, cryogenic brackets, diagnostic mounts, cooling manifolds, helium leak testing, CT, CMM, and traceability.
Engineering RFQ guide for titanium 3D printed geothermal and downhole energy parts, covering brine exposure, sensor housings, manifolds, DLE test hardware, leak testing, CT, CMM, and traceability.
Engineering RFQ guide for titanium 3D printed oil and gas, LNG, refinery, and petrochemical hardware, covering corrosion exposure, sour-service review, API 20S, pressure testing, CT, CMM, machining, and traceability.
Engineering RFQ guide for titanium 3D printed carbon capture and direct air capture hardware, covering solvent and sorbent loops, CO2 manifolds, vacuum regeneration, heat-transfer test bodies, leak testing, CT, CMM, and traceability.
Engineering RFQ guide for titanium 3D printed hydraulic manifolds and fluid power components, covering valve blocks, actuator manifolds, internal channels, pressure drop, leak testing, CT, CMM, machining, and traceability.
Engineering RFQ guide for titanium 3D printed industrial valves, pump parts, static mixers, nozzles, and flow control hardware, covering corrosion exposure, seal faces, pressure testing, CT, CMM, machining, and traceability.
Decide when titanium additive manufacturing fits a heat exchanger, then define channels, powder removal, machining, CT, leak testing, and RFQ acceptance evidence.
6 guides
Specify the actual chemistry, concentration, temperature, erosion, deposits, galvanic interfaces, cleaning, and acceptance test.
Engineering RFQ guide for titanium 3D printed chemical processing and water treatment parts, covering corrosion exposure, CP titanium vs Ti-6Al-4V, pump and valve bodies, manifolds, static mixers, leak testing, CT, CMM, and traceability.
Engineering RFQ guide for titanium 3D printed seawater desalination and brine concentration hardware, covering RO sample blocks, brine manifolds, MLD/ZLD pilot skids, CP titanium, leak testing, CT, CMM, and traceability.
Engineering RFQ guide for titanium 3D printed marine and subsea parts, covering seawater corrosion, ROV and AUV brackets, offshore manifolds, galvanic isolation, pressure testing, CMM, CT, and cost control.
Engineering RFQ guide for titanium 3D printed battery recycling and critical minerals processing parts, covering black mass leach loops, manifolds, CP titanium, corrosion exposure, leak testing, CT, CMM, and traceability.
Engineering RFQ guide for titanium 3D printed direct lithium extraction and brine processing hardware, covering brine manifolds, sorbent skids, pump and valve adapters, sensor housings, corrosion coupons, leak testing, CT, CMM, and traceability.
Engineering RFQ guide for TC4, Ti-6Al-4V, Grade 5, CP titanium, and titanium 3D printed mining, mineral processing, and hydrometallurgy hardware, covering acid leach loops, slurry nozzles, corrosion, erosion, CT, CMM, machining, and traceability.